incremental encoder with A/B outputs

Rotary Encoder Chip ID4501C
Encoder dimensions 5 x 6 x 0.8 mm3
Codewheels diameter 28, 53 or 73 mm
Resolution 128 up to >1,000,000 CPR
Speed up to 23,000 RPM at 2,048 CPR and up to 45 RPM at highest resolution
Datasheet
Configure and buy this product in the POSIC webstore

---

Rotary Encoder Kit ID1102C
Encoder dimensions 6.8 x 9.0 x 0.9 mm3
Codewheels diameter 28, 53 or 73 mm
Resolution 128 up to >1,000,000 CPR
Speed up to 23,000 RPM at 2,048 CPR and up to 45 RPM at highest resolution
Datasheet
Configure and buy this product in the POSIC webstore

---

---

incremental Encoder with A/B/I outputs

• Rotary Encoder Chip IT5602C
  

Encoder dimensions 8 x 10 x 0.8 mm3
Codewheels diameter 28, 53 or 73 mm
Resolution 256 up to > 1,000,000 CPR
Speed up to 8,600 RPM at 8,192 CPR and up to 1 RPM at highest resolution
Datasheet
Configure and buy this product in the POSIC webstore

---

Rotary Encoder Kit IT3402C
Encoder dimensions 11 x 11 x 0.9 mm3
Codewheels diameter 28, 53 or 73 mm
Resolution 256 up to > 1,000,000 CPR
Speed up to 8,600 RPM at 8,192 CPR and up to 1 RPM at highest resolution
Datasheet
Configure and buy this product in the POSIC webstore

---

---

incremental Gear Encoder with A/B outputs

Gear Speed Sensor Chip ID4501G
Sensor dimensions 5 x 6 x 0.8 mm3
Gear with 12 up to 120 teeth module 0.5
Interpolation factor up to x16,384
Tooth frequency up to 25 kHz
Datasheet
Configue and buy this product in the POSIC webstore

---

Gear Speed Sensor ID1102G
Sensor dimensions 11 x 11 x 0.9 mm3
Gear with 12 up to 120 teeth module 0.5
Interpolation factor up to x16,384
Tooth frequency up to 25 kHz
Datasheet
Configure and buy this product in the POSIC webstore

---

---

codewheels

Codewheels and gears are part of the encoder kits, but can be ordered separately as well.
Select your codewheel in the POSIC webstore

---

---

Evaluation and programming tool

Evaluation and Programming Tool for Encoder Kits
For all of POSIC's encoder kits
Ideal for initial evaluation of POSIC encoders
Allows you to:
- program the encoder resolution and maximum speed
- linearize the encoder after assembly in your application
- diagnose the encoder in the case of technical issues

Datasheet

Order the Evaluation & Programming Tool by clicking on the image of the encoder that you want and then selecting "Evaluation & Programming Tool" at the top of the configuration-list on the right-hand side.