Incremental Encoder with A/B outputs

Linear Encoder Chip ID4501L
Linear Encoder Chip ID4501L
Encoder dimensions 5 x 6 x 0.8 mm3
Scale 4.4 mm wide, 0.9 mm thick, up to 550 mm long
Resolution down to 0.02 µm
Speed up to 32 m/s at 10 um resolution and up to 60 mm/s at 0.02 µm resolution
Datasheet
Configure and buy this product in the POSIC webstore
Linear Encoder Kit ID1102L
Linear Encoder Kit ID1102L
Encoder dimensions 6.8 x 9.0 x 0.9 mm3
Scale 4.4 mm wide, 0.9 mm thick, up to 550 mm long
Resolution down to 0.02 µm
Speed up to 32 m/s at 10 um resolution and up to 60 mm/s at 0.02 µm resolution
Datasheet
Configure and buy this product in the POSIC webstore

incremental encoder with A/B/I outputs

Linear Encoder Chip IT5602L
Linear Encoder Chip IT5602L
Encoder dimensions 8 x 10 x 0.8 mm3
Scale 7.5 mm wide, 0.9 mm thick, up to 200 mm long
Resolution down to 0.04 µm
Speed up to 11 m/s at 2.3 um resolution and up to 10 mm/s at 0.04 µm resolution
Datasheet
Configure and buy this product in the POSIC webstore
Linear Encoder Chip IT3402L
Linear Encoder Kit IT3402L
Encoder dimensions 11 x 11 x 0.9 mm3
Scale 7.5 mm wide, 0.9 mm thick, up to 200 mm long
Resolution down to 0.04 µm
Speed up to 11 m/s at 2.3 um resolution and up to 10 mm/s at 0.04 µm resolution
Datasheet
Configure and buy this product in the POSIC webstore

Linear Scales

POSIC Linear Scales for Miniature Inductive Encoders


Scales are part of the encoder kits, but can be ordered separately as well.
They come in lengths of 26 and 205 mm and can be cut to the length that fits in your application.
All scales are equipped with a backside adhesive for easy installation.
Select your scale in the POSIC webstore

Evaluation and programming tool

Evaluation and Programming Tool for Encoder Kits
For all of POSIC's encoder kits
Ideal for initial evaluation of POSIC encoders
Allows you to:
- program the encoder resolution and maximum speed
- linearize the encoder after assembly in your application
- diagnose the encoder in the case of technical issues

Datasheet

Order the Evaluation & Programming Tool by clicking on the image of the encoder that you want and then selecting "Evaluation & Programming Tool" at the top of the configuration-list on the right-hand side.